Airbrush Machine

Product description

• Article code: 1810242000
• SKU: 38679

Product Description

With this airbrush device, you can effortlessly create professional nail art designs. Mix gel polish or lacquer with thinner, adjust the consistency, and spray smoothly onto your nails for a flawless finish.

Features & benefits

• Precision spray nozzle
• Adjustable pressure control
• 3 Interchangeable cups
• Lightweight
• Portable
• Rechargeable
• Easy to clean
• Dual-action trigger
• Voltage:12V/2A
• Input Voltage: 100-240V 50/60Hz
• Rotating Speed: 0-35,000 rpm max

Power Input: 25W

Usage

1. Ensure that the airbrush machine is fully charged before initial use.
2. Install the airbrush on the air pump.
3. Add gel polish/lacquer to cup and dilute with thinner. Ratio should be 1 part gel polish/lacquer to 1 part thinner.
4. Thoroughly mix gel polish/lacquer and thinner. Ensure that the mixture is smooth and free of any lumps or streaks.
5. Short press the ON/OFF switch on the compressor.
6. Test spray on a piece of paper to check the consistency and flow of the diluted gel polish/lacquer.
1. Note: Adjust the mixture if necessary to achieve the desired spray pattern and coverage.
7. Hold the airbrush machine perpendicular to the nail surface, approximately 4-6 inches away.
8. Slightly pull the trigger then move the airbrush gun in a smooth, fluid motion to achieve desired design.
9. Cure gel nail polish according to manufacturer’s instructions. If using lacquer, allow it to fully dry.
1. Note: If applying multiple layers, make sure each layer is fully cured / dry before applying another coat.
10. Apply topcoat.